Maintenance free, high performance sand filters. Manufactured with a non-corrosive gel coat finish.
Hi-Rate Filter
Non-Corrosive Gel Coated Fibreglass Case
A.B.S. Pipework and Underdrains
See-through Tank Lid
Automatic Air Bleed Tube
Backwash Indicator Pressure Guage to 35 p.s.i./4 Bar
Easy-reach Drain plug
6 Position Multiport Valve

find out more

Bio UV

Bio UV

Online Catalogue | UV Clarifiers | Bio UV

SoftFuse Nice Tables Preview

BIO UV Performance Table

Model	Power	Recommended Flow Rate	Max Pond Size	Height	Diameter	Pipe Connections	UV Exposure
	Watt	Litre/hr (gph)	Litres (gallons)	cms	cms	mm Pressure Pipe	Seconds
BIO UV10	38	7000 (1540)	18160(4000)	42	15	50	2.8
BIO UV20	59	14000 (3080)	36320 (8000)	62	15	50	2.6
BIO UV30	75	23000 (5060)	68100 (15000)	94	15	63	2.3
BIO UV40	102	32000 (7040)	122580 (27000)	120	15	75	2.1

Bio UV Professional UV Unit

Ref: BIOUV

These UV units are made of a high quality stainless steel (316L) and have an unequalled performance
at high flow rates. The 150 mm diameter of the housing assures a minimum exposure of 2 seconds to
UV radiation at the recommended flow rates (see table). Due to the use of special "High Intensity" UV
lamps with an output of 30.000 micro Watt
and the minimum exposure of 2 sec, they
kill microscopic algae as well as 99.9% of
harmful bacteria and viruses, including
Aeromanas, Pseudomonas and Legionella!
The type of BIO-UV lamp should be based
on an effective flow rate per hour,
provided by the pump, rather than on the
volume of the pond. BIO-UV lamps are
used instead of chlorine for disinfection of
swimming pools.
- maximum continuous pressure: 3 bar,
- maximum water temperature 40ºC,
- 8000 hours of effective use (performance
is measured after 8000 hours of use).

Select BIO UV required

Replacemnt Lamps for BIO UV

Ref: BIOLAMP

Single Ended Electrical Connections

Select Lamp Required

Quartz Sleeve for Bio UV

Ref: BIOQUARTZ

ModelSelect Sleeve Required

Ballast for Bio UV

Ref: BIOBAL

Select Ballast Required