Maintenance free, high performance sand filters. Manufactured with a non-corrosive gel coat finish.
Hi-Rate Filter
Non-Corrosive Gel Coated Fibreglass Case
A.B.S. Pipework and Underdrains
See-through Tank Lid
Automatic Air Bleed Tube
Backwash Indicator Pressure Guage to 35 p.s.i./4 Bar
Easy-reach Drain plug
6 Position Multiport Valve

find out more

Dab Pumps

Dab Pumps

Online Catalogue | Water Pumps Submersible | Dab Pumps

Dab Nova Pumps

Ref: DABN

Pump body, impeller, cap and suction grid in technopolymer. Motor, rotor shaft and screws in stainless steel. Triple O-ring seal interposed with an oil precombustion chamber. Continuous duty submersible asynchronous motor. Stator fitted in an airtight stainless steel casing. Rotor mounted on overdimensioned, greased-for-life ball bearings. Built-in thermal and current overload protection and a capacitor permanently on in the single-phase version.
Pump Performance Curves can be found by pressing the "More" Button

Select Pump Required

Dab Feka Pumps

Ref: DABF

Continuous duty plastic submersible pump. Built in thermal and current overload. Double lip seal with oil bath motor. Automatic float switch. 240v single phase motor. 5m cable. Duty: 7m Max head. Max Flow 250l/m. 25mm solids capacity. 11/4'' BSP Female connection. Application: Lifting water from pond, pools, fountains and cellars.

Pump Performance Curves can be found by pressing the "More" Button

Select Pump Required

Dab Drenag Pumps

Ref: DABD

Submersible pumps with standard thermal protection for single-phase,
protection level: IP 68, Insulation class: F.
Liquid temperature range: from 0°C to + 35°C for domestic application
(CEI 60335-2-41)

Installation: fixed or portable, vertical
Mechanical seal with intermediate oil chamber
Pumped liquid: waste containing particlesup to a max size of 10mm (Drenag 300-600)

Max immersion depth: 5 metres (Drenag 300-600)

Semi wet motor watercooled
Supplied with 10 metres of H0NR-f power cable.

Select Pump Required