Product Sections

Main Pages

About Us

New Products

Sabaflex HS

£17.30

Suitable for use with Poolflex And PVC Mouldings up to 63mm Diameter, limited to 6 bar.

Only Available in 650ml

find out more

Best Sellers

Side Mounted Valve F/Glass

Maintenance free, high performance sand filters. Manufactured with a non-corrosive gel coat finish.
Hi-Rate Filter
Non-Corrosive Gel Coated Fibreglass Case
A.B.S. Pipework and Underdrains
See-through Tank Lid
Automatic Air Bleed Tube
Backwash Indicator Pressure Guage to 35 p.s.i./4 Bar
Easy-reach Drain plug
6 Position Multiport Valve

find out more

Heating Controllers

Online Catalogue | Pond Heating | Heating Controllers

Digi-Stat

Ref: DIGI

High Accuracy Easy Set Digital Thermostat. Designed to give automatic temperature control for Koi ponds. Operating in the range of 5° to 30°C this highly accurate stat will hold the water temperature within ± 0.1°C. The Unit is programmed with an automatic temperature gradient control which eliminates temperature shock for the fish when changing settings. The unit can operate most boilers, motorised valves and electric heaters upto 3kw. A large clear display and single button setting make this a very user friendly thermostat. The unit also features a water level sensor option which cuts off the heat source at low water level and remote alarm option to give warning of any faults. Requires a probe of suitable length for your installation. Please see product codes 39805 to 39820.
SPECIFICATION
Display ~ 3 digit LED : Resolution ~ 0.1 ºC : Display Range ~ 0.0 ºC to 40.0 ºC : Set Temperature Range ~ 5.0 ºC to 30.0 ºC : Thermistor Accuracy ~ ± 1% @ 25ºC : Programmed Temperature Rise Rate ~ 2 ºC per day (maximum ½ ºC per 6 hours) : Programmed Temperature Fall Rate ~ 1ºC per day (maximum ½ ºC per 12 hours) : Heater Circuit Switching Capability ~ 3kw 230volt max : Enclosure Rating ~ IP56 :
Available Temperature Sensor Leads ~ 5, 10, 15 & 20m.

Price of Digi-Stat Does not include Temperature or Level Sensing Probe

Price: £94.00 (Including VAT at 17.5%)

CATALOG SUSPENDED

Temperature Probe for Digi-Stat

Ref: THERMI

High Accuracy Thermistor Probe with Cable. The probe tip must be completely submerged in the water . It is best mounted away from the heater inlet and away from fish, ideally somewhere in the filter system. It is connected into the Filtertech Digi-Stat terminals marked 'thermistor'. These Probes Cannot be used with other thermostats.

Select Probe/Cable Length

CATALOG SUSPENDED

Remote Alarm for Digi_Stat

Ref: REMALM

A battery Powered alarm which can be mounted anywhere indoors up to 50m from the Digi-Stat. Activated by sensor or power failures or by low water level (if fitted) the unit gives a strong audiable warning.

Price: £25.49 (Including VAT at 17.5%)

CATALOG SUSPENDED

Water Level Probe for Digi-Stat

Ref: LEVALM

Two Types of float switch are available as upgrade options to the digi-stat. The vertical float gives high accuracy operation (5mm max Range) and the horizontal bulkhead float allows greater water level changes before switching. Both come standard with a 5m lead and longer cables are avaliable.

Price: £20.37 (Including VAT at 17.5%)

Select Float

Vertical Float

Horizontal Float

CATALOG SUSPENDED